Make a Butterfly Headboard for Twin Bed

Published On June 5, 2017 | By tuye | Bed Headboard

Headboard for twin bed – Starting with set the size of your headboard. Add 4 – 8 inches to your width measurement. The headboard should include at least 28 inches above the level mattress. Select a piece of 1/2-inch plywood to fit your dimensions. Draw butterfly shape on the plywood & cut out when finished. Place the headboard on a flat surface on top of the batting material. Fold batting around the headboard. Staple it to the back using a staple gun.

Beautiful Headboard for Twin Bed

Beautiful Headboard for Twin Bed

Sew two lengths of fabric together. Hiding the seam of the stitching contrasting trim strip. Place headboard for twin bed down to the bottom of fabric. Position the fabric so that the center seam is aligned with the center of the figure butterfly. Cut the fabric to the dimensions of headboard; add 6 inches on each edge of the fabric. Pull the fabric tight to the back of the headboard. Then booklets until the fabric are stretched tight and secured. Sew two lengths of plain white backing fabric together. Place the fabric on the back of headboard, seam side down. Cut the fabric to the exact size of your table. Fold & staple the fabric under 1 inch all the way around.

12 Photos Gallery of: Make a Butterfly Headboard for Twin Bed

Image of: Beautiful Headboard for Twin Bed

Image of: Black Headboard for Twin Bed

Image of: Decorative Headboard for Twin Bed

Image of: Elite Headboard for Twin Bed

Image of: Headboard for Twin Bed For Small Room

Image of: Headboard for Twin Bed Model

Image of: Homemade Headboard for Twin Bed

Image of: Kids Twin Headboards For Beds Kids Playroom Ideas Headboard For Twin Bed

Image of: Padded Headboard for Twin Bed

Image of: Rustic Headboard for Twin Bed

Image of: Wooden Headboard for Twin Bed

Image of: Xl Headboard for Twin Bed

Keep headboard about 1 inch below the top of the mattress. Measuring from 2 to 3 inches below the top of the headboard on the floor. Have legs cut from 1-inch-by-4-inch pine boards on a lumberyard. Line up boards. Place pins on the headboard for your goals. Power consumption in standby headboard up. Adjust the legs with the holes on the bed frame. Mark the position of the holes. Drill holes. Adds legs bed frame with nuts and bolts. Make sure the legs resting safely on the floor. Your butterfly headboard for twin bed was done.

Related  Unique Twin Bed with Bookcase Headboard

Comments are closed.