Bedframe with headboard – For headboard Construction: Measure each side of the bed from the desired top point. Combine with the width of the bed for the whole headboard measurement. Add 8 inches to the headboard height measurement. Have sawmill cut pieces of 2-by-12-by-8 lumber. Cut 1/2-inch plywood to the headboard measurements. And pine pieces to assemble headboard measurement. Add headboard piece face down on the carpet batting. Cut quilt batting in the form of headboard leave six additional inches of batting around each edge.
Stretch batting tightly around headboard and staples. Repeat the same process with headboard laying batting side down on the wrong side of the fabric. Measure 6 inches from each side of the headboard. And attach one of four pine pieces using a 1/4-inch screws. From the bottom of pine pieces, measures 2 inches up and drill Thurs., January 1/4-inch hole four inches apart. Build Bed Frame of bedframe with headboard: Sand the cut edges of two-by-12-by-8 pieces of lumber. After grain of the wood, use a rag to apply the stain. Follow stain directions and apply additional coats as necessary to achieve the desired shade.
12 Photos Gallery of: Build Bedframe with Headboard
Let the stain dry between coats. Once the stain has dried, apply a coat of polyurethane with a brush and let it dry. Apply several coats as needed until the desired finish is achieved. Allow each coat to dry before applying the next. And lightly sand between coats. Drill two corresponding holes in the bed piece. Attach pine pieces to frame the piece with hex bolts, nuts and lock washers. Align right frame pieces and headboard complete with bed measurements. Connect the pieces together with a 1/4-inch screws to secure the corner brackets on the inside of each joint. And the building of bedframe with headboard was finished.